The effect of punching on electrical machine | El Youssef, Mohamad
/5

0 avis

The effect of punching on electrical machine

Archive ouverte : Article de revue

El Youssef, Mohamad | Benabou, Abdelkader | Coorevits, Thierry | van Gorp, Adrien | Clenet, Stéphane | Faverolle, Pierre | Mipo, Jean-Claude | Lavalley, Yannick | Lecuppe, Thomas

Edité par HAL CCSD ; IOS Press

International audience. This work enlightens the impact of punching on a specific stator performances. Two specimens type are withdrawn from a M330A35 punched lamination sheet. One type represents a closed magnetic circuit while the other represents two parts. Magnetic measurements are performed on both types. Measurements are compared with those performed on specimens cut by WEDM. The specific purpose of this paper is to investigate the impact of punching in presence of air gap which exist in electrical machines between rotor and stator. Therefore a dedicated device is developed in order to control airgap perfectly and FEM simulations are also presented to make results more accurate.

Consulter en ligne

Suggestions

Du même auteur

Experimental set up for magnetomechanical measurements with a closed flux path sample | El Youssef, Mohamad

Experimental set up for magnetomechanical measurements with a closed flux p...

Archive ouverte: Article de revue

El Youssef, Mohamad | 2020-08-28

International audience. In this article, an experimental procedure is presented to handle magnetic measurements under uniaxial tensile stress reaching the plastic domain. The main advantage of the proposed procedure...

Slinky stator: The impact of manufacturing process on the magnetic properties | Youssef, Mohamad El

Slinky stator: The impact of manufacturing process on the magnetic properti...

Archive ouverte: Communication dans un congrès

Youssef, Mohamad El | 2017-05

International audience

Effect on magnetic properties of inhomogeneous compressive stress in thickness direction of an electrical steel stack | Helbling, H.

Effect on magnetic properties of inhomogeneous compressive stress in thickn...

Archive ouverte: Article de revue

Helbling, H. | 2020

International audience. The manufacturing processes of electrical machines may lead to significant degradation of magnetic core properties and therefore of the machine performance. Laminations are usually stacked an...

Du même sujet

Development and validation of an electrical and magnetic characterization device for massive parallelepiped specimens | Toto Jamil, Meryeme

Development and validation of an electrical and magnetic characterization d...

Archive ouverte: Article de revue

Toto Jamil, Meryeme | 2019-07-24

International audience. Claw pole (CP) machine performances are strongly related to the electromagnetic properties of ferromagnetic materials. These properties are impacted by the manufacturing processes, in a heter...

Exploitation of independent stator and rotor geometrical periodicities in electrical machines using the Schur complement | Al Eit, Moustafa

Exploitation of independent stator and rotor geometrical periodicities in e...

Archive ouverte: Article de revue

Al Eit, Moustafa | 2019

International audience. In this paper we present a-priori model reduction technique that enables to take full advantage of the periodicity existing in the stator and rotor geometrical structures of electrical machin...

Delta-Sigma data converters : theory, design, and simulation / edited by Steven R. Norsworthy, Richard Schreier, Gabor C. Temes | Norsworthy, Steven R. (1956-). Directeur de publication

Delta-Sigma data converters : theory, design, and simulation / edited by St...

Livre | Norsworthy, Steven R. (1956-). Directeur de publication | 1996

Model Order Reduction applied to a linear Finite Element model of a squirrel cage induction machine based on POD approach | Montier, L.

Model Order Reduction applied to a linear Finite Element model of a squirre...

Archive ouverte: Article de revue

Montier, L. | 2021-03-17

International audience. The Proper Orthogonal Decomposition (POD) approach is applied to a linear Finite Element (FE) model of a squirrel cage induction machine. In order to obtain a reduced model valid on the whole...

Temperature-dependent modelling of magnetic ageing of FeSi electrical steels | Helbling, H.

Temperature-dependent modelling of magnetic ageing of FeSi electrical steel...

Archive ouverte: Article de revue

Helbling, H. | 2022-12-15

International audience. This paper deals with the temperature-dependent modelling of iron losses in the context of magnetic ageing of electricals steel used in high power electrical machines. First, two electrical s...

Solving Magnetodynamic Problems via Normal Form Method | Ugwuanyi, Nnaemeka S.

Solving Magnetodynamic Problems via Normal Form Method

Archive ouverte: Article de revue

Ugwuanyi, Nnaemeka S. | 2022-03

International audience. Closed-form formulations are difficult to find when the material behavior law is nonlinear. A linear approximation, on the otherhand, has a very narrow range of validity. In this communicatio...

Chargement des enrichissements...