Error estimation of a proper orthogonal decomposition reduced model of a permanent magnet synchronous machine

Archive ouverte : Communication dans un congrès

Henneron, Thomas | Mac, Hung | Clenet, Stéphane

Edité par HAL CCSD ; IEEE

Model order reduction methods, like the proper orthogonal decomposition (POD), enable to reduce dramatically the size of a finite element (FE) model. The price to pay is a loss of accuracy compared with the original FE model that should be ofcourse controlled. In this study, the authors apply an error estimator based on the verification of the constitutive relationship to compare the reduced model accuracy with the full model accuracy when POD is applied. This estimator is tested on an example ofa permanent magnet synchronous machine.. International audience. Model order reduction methods, like the proper orthogonal decomposition (POD), enable to reduce dramatically the size of a finite element (FE) model. The price to pay is a loss of accuracy compared with the original FE model that should be ofcourse controlled. In this study, the authors apply an error estimator based on the verification of the constitutive relationship to compare the reduced model accuracy with the full model accuracy when POD is applied. This estimator is tested on an example ofa permanent magnet synchronous machine.

Consulter en ligne

Suggestions

Du même auteur

Influence of uncertainties on the B(H) curves on the flux linkage of a turboalternator | Mac, Hung

Influence of uncertainties on the B(H) curves on the flux linkage of a turb...

Archive ouverte: Article de revue

Mac, Hung | 2013-11

International audience. In this paper, we analyze the influence of the uncertainties on the behavior constitutive laws of ferromagnetic materials on the behavior of a turboalternator. A simple stochastic model of an...

Study of the Influence of the Fabrication Process Imperfections on the Performances of a Claw Pole Synchronous Machine Using a Stochastic Approach | Liu, Sijun

Study of the Influence of the Fabrication Process Imperfections on the Perf...

Archive ouverte: Article de revue

Liu, Sijun | 2015-12-01

International audience. In mass production, fabrication processes of electrical machines are not perfectly repeatable with time, leading to dispersions on the dimensions which are not equal to their nominal values. ...

A posteriori error estimation for stochastic static problems | Mac, Hung

A posteriori error estimation for stochastic static problems

Archive ouverte: Article de revue

Mac, Hung | 2014-02-01

International audience. To solve stochastic static field problems, a discretization by the Finite Element Method can be used. A system of equations is obtained with the unknowns (scalar potential at nodes for exampl...

Du même sujet

Model Order Reduction of Electrical Machines with Multiple Inputs | Farzam Far, M.

Model Order Reduction of Electrical Machines with Multiple Inputs

Archive ouverte: Article de revue

Farzam Far, M. | 2017

International audience. In this paper, proper orthogonal decomposition method is employed to build a reduced-order model from a high-order nonlinear permanent magnet synchronous machinemodel with multiple inputs. Th...

Nonlinear data-driven model order reduction applied to circuit-field magnetic problem | Pierquin, Antoine

Nonlinear data-driven model order reduction applied to circuit-field magnet...

Archive ouverte: Article de revue

Pierquin, Antoine | 2021-11

International audience. As in most of the domains in physics, finite element formulation is a very common method for electromagnetic fields computation. Since many years both proper orthogonal decomposition and empi...

Data-Driven Model Order Reduction for Magnetostatic Problem Coupled with Circuit Equations | Pierquin, Antoine

Data-Driven Model Order Reduction for Magnetostatic Problem Coupled with Ci...

Archive ouverte: Article de revue

Pierquin, Antoine | 2017

Among the model order reduction techniques, the Proper Orthogonal Decomposition (POD) has shown its efficiency to solve magnetostatic and magneto-quasistatic problems in the time domain. However, the POD is intrusive in the sense ...

Model order reduction of quasi-static problems based on POD and PGD approaches | Henneron, Thomas

Model order reduction of quasi-static problems based on POD and PGD approac...

Archive ouverte: Article de revue

Henneron, Thomas | 2013-05-21

International audience. In order to reduce the computation time of a quasi-static problem solved by the nite element method, methods of model order reduction can be applied. In this context, two approaches, the Prop...

Model Order Reduction of Magnetoquasistatic Problems Based on POD and Arnoldi-based Krylov Methods | Pierquin, Antoine

Model Order Reduction of Magnetoquasistatic Problems Based on POD and Arnol...

Archive ouverte: Article de revue

Pierquin, Antoine | 2015

International audience. The Proper Orthogonal Decomposition method and the Arnoldi-based Krylov projection method are investigated in order to reduce a finite element model of a quasistatic problem. Both methods are...

Model-Order Reduction of Magnetoquasi-Static Problems Based on POD and Arnoldi-Based Krylov Methods | Pierquin, Antoine

Model-Order Reduction of Magnetoquasi-Static Problems Based on POD and Arno...

Archive ouverte: Communication dans un congrès

Pierquin, Antoine | 2014-05

The proper orthogonal decomposition method and Arnoldi-based Krylov projection method are investigated in order to reduce a finite-element model of a quasi-static problem. Both methods are compared on an academic example in terms ...

Chargement des enrichissements...