Multi-physics modeling of a permanent magnet synchronous machine by using lumped models

Archive ouverte : Article de revue

Bracikowski, N | Hecquet, Michel | Brochet, Pascal | Shirinskii, Sergey V.

Edité par HAL CCSD ; Institute of Electrical and Electronics Engineers

International audience. This paper describes the modeling of a permanent magnet synchronous machine by using lumped models. Designing electrical machines necessarily involves several fields of physics, such as electromagnetics, thermics, mechanics and acoustics. Magnetic, electrical, electronic and thermal parts are represented by lumped models, whereas vibro-acoustic and mechanical parts are represented by analytical models. The aim of this study is to build a design model of a permanent magnet synchronous machine for traction applications. Each model is parameterized in order to optimize the machine. The method of taking into account saturation and movement is described. These fast, lumped models make it possible to couple the software used with optimization tools. Simulation results are presented and compared with the finite element method and the experiments performed.

Consulter en ligne

Suggestions

Du même auteur

Simulation of a large power Brushless Synchronous Generator (BLSG) with a rotating rectifier by a reluctance network for fault analysis and diagnosis | Bui, H,

Simulation of a large power Brushless Synchronous Generator (BLSG) with a r...

Archive ouverte: Article de revue

Bui, H, | 2017

International audience. The aim of this paper is to simulate a large power brushless synchronous generator (BLSG) used for large turbo-alternator brushless excitation systems, under conditions of saturation and rota...

Characterisation of radial vibration force and vibration behaviour of a PWM-fed fractional-slot induction machine | Le Besnerais, Jean

Characterisation of radial vibration force and vibration behaviour of a PWM...

Archive ouverte: Article de revue

Le Besnerais, Jean | 2009

International audience. This paper presents the full analysis of the vibration behaviour responsible for audible magnetic noise in a PWM-fed fractional-slot induction machine, including theoretical predictions, nume...

Vibro-Acoustic Optimization of a Permanent Magnet Synchronous Machine Using The Experimental Design Method | Vivier, Stephane

Vibro-Acoustic Optimization of a Permanent Magnet Synchronous Machine Using...

Archive ouverte: Article de revue

Vivier, Stephane | 2006-06

International audience. —The aim of this paper is to use an analytical multi-physical model – electromagnetic, mechanic and acoustic – in order to predict the electromagnetic noise of a permanent magnet synchronous ...

Du même sujet

Delta-Sigma data converters : theory, design, and simulation / edited by Steven R. Norsworthy, Richard Schreier, Gabor C. Temes | Norsworthy, Steven R. (1956-). Directeur de publication

Delta-Sigma data converters : theory, design, and simulation / edited by St...

Livre | Norsworthy, Steven R. (1956-). Directeur de publication | 1996

MULTI-PHYSICS DESIGN RULES USING LUMPED MODELS FOR A PERMANENT MAGNET SYNCHRONOUS MACHINE | Bracikowski, Nicolas

MULTI-PHYSICS DESIGN RULES USING LUMPED MODELS FOR A PERMANENT MAGNET SYNCH...

Archive ouverte: Article de revue

Bracikowski, Nicolas | 2013-09

International audience. Modeling the dynamic behavior of electrical machines involves several fields of physics, such as electromagnetics, electronics, mechanics, thermodynamics and acoustics. Multi-physics lumped m...

A Method for Fault Detection and Isolation based on the Processing of Multiple Diagnostic Indices: Application to Inverter Faults in AC Drives | Meinguet, Fabien

A Method for Fault Detection and Isolation based on the Processing of Multi...

Archive ouverte: Article de revue

Meinguet, Fabien | 2013-05

International audience. A general method for fault detection and isolation is proposed and applied to inverter faults in drives of electric vehicles. This method is based on a change-detection algorithm, which allow...

Signal-based Technique for Fault Detection and Isolation of Inverter Faults in Multi-phase Drives | Meinguet, Fabien

Signal-based Technique for Fault Detection and Isolation of Inverter Faults...

Archive ouverte: Communication dans un congrès

Meinguet, Fabien | 2012-12-17

International audience. A method for fault detection and isolation is proposed and applied to inverter faults in multi-phase drives. An analysis of simulations in faulty conditions leads to the derivation of suitabl...

Flux-weakening operation of open-end winding drive integrating a cost effective high-power charger | Sandulescu, Paul

Flux-weakening operation of open-end winding drive integrating a cost effec...

Archive ouverte: Article de revue

Sandulescu, Paul | 2013-01

International audience. In this paper, a three-phase drive with a six-leg Voltage Source Inverter (VSI) and an open-end winding Interior Permanent Magnet Synchronous Machine (IPMSM) designed for the traction of an e...

Vectorial Approach Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation | Locment, Fabrice

Vectorial Approach Based Control of a Seven-Phase Axial Flux Machine Design...

Archive ouverte: Article de revue

Locment, Fabrice | 2008-10

Version éditeur disponible à l'adresse suivante : http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4519973&isnumber=4636792. International audience. This paper deals with easy-to-implement control strategies ...

Chargement des enrichissements...