Physical, Mechanical, Thermal and Electrical properties of cooked red bean (Phaseolus Vulgaris L.) for continuous ohmic heating process

Archive ouverte : Article de revue

Legrand, Alexandra | Leuliet, Jean Claude | Duquesne, Sophie | Kesteloot, Régis | Winterton, Peter | Fillaudeau, Luc

Edité par HAL CCSD ; Elsevier

Due to their complex composition and properties, the continuous thermal processing of solid-liquid mixtures (e.g. suspension of fragile particle in viscous carrier fluids) remains an empirical and random operation as compared to canning. Alternative technologies (e.g. ohmic heating) may achieve high-temperature treatment in a short time (HTST) but requires a perfect knowledge of thermo-physical and electrical properties of both particles and carrier fluid. Food properties are needed and play a significant role to predict and define the quality and behaviour of solid-liquid mixture. The properties of red beans (Phaseolus vulgaris L.) and a model non-Newtonian carrier fluid were studied throughout the duration of the process. Physical (theological behaviour, density, shape and dimensions), mechanical (elasticity modulus, maximal deformation and stress) and thermal (heat capacity, thermal conductivity, thermal diffusivity) properties as a function of water content ranging from 11.6 to 67.4% w/w are reported. The electrical conductivity (electrical properties) was described as a function of the temperature and the solid concentration by a semi-empirical equation. The limiting factors to succeed a HTST for heterogeneous products in continuous thermal process were identified and discussed in the light of the properties of the foods involved. The large dispersion of particle mass volume had a simultaneous incidence of the suspension flow and the heat transfer. The volume expansion of particle (+22% between blanched and cooked bean) and the important loss of mechanical properties (-68% for elastic properties) constitutes unavoidable limiting factors inducing mechanical degradation and sometimes plugging of the duct. The electrical conductivity is strongly affected by a combined effect of temperature and solid concentration, which will induces irreversible heat treatment heterogeneity between particles. This work stresses that the continuous conventional or ohmic heating of these cooked dishes will be hard to achieve on an industrial scale.

Consulter en ligne

Suggestions

Du même auteur

Investigation and modeling of Residence Time Distribution and thermal dissipation in a Dynamic Filtration module | Xie, Xiaomin

Investigation and modeling of Residence Time Distribution and thermal dissi...

Archive ouverte: Communication dans un congrès

Xie, Xiaomin | 2017-07-11

In: 16ème Congrès de la Société Française de Génie des Procédés (SFGP), 11 - 13 July 2017, Nancy, France. Récents Progrès en Génie des Procédés, Numéro 110 – 2017 ISSN: 1775-335X ; ISBN: 978-2-910239-85-5, Ed. SFGP, Paris, FranceI...

Modelling and measurement of residence time distribution in tubular Joule effect heaters with and without geometric modifications | André, Christophe

Modelling and measurement of residence time distribution in tubular Joule e...

Archive ouverte: Communication dans un congrès

André, Christophe | 2006-10-02

In food industry, heat treatment of highly viscous fluids in continuous process is more and more common and the process should perform homogenous thermal treatment in order to ensure quality and safety of the f...

Impact of processing conditions (flow regime, heating) on residence time distribution in tubular joule effect heaters. | Fillaudeau, Luc

Impact of processing conditions (flow regime, heating) on residence time di...

Archive ouverte: Communication dans un congrès

Fillaudeau, Luc | 2006-09-17

In : IUFOST, 13th World Congress of Food Science and Technology "Food is Life", 17-21 Septembre 2006, Nantes, France, p.217-218.In : IUFOST, 13th World Congress of Food Science and Technology "Food is Life", 17-21 Septembre 2006, ...

Du même sujet

Traitements thermiques des produits métallurgiques : trempe, recuit, revenu / par Léon Guillet, ... | Guillet, Léon (1873-1946). Auteur

Traitements thermiques des produits métallurgiques : trempe, recuit, revenu...

Livre | Guillet, Léon (1873-1946). Auteur | 1909

Characterization of the local Electrical Properties of Electrical Machine Parts with non-Trivial Geometry | Arbenz, Laure

Characterization of the local Electrical Properties of Electrical Machine P...

Archive ouverte: Article de revue

Arbenz, Laure | 2015-06-30

In electrical machines, knowing the electrical conductivity is of importance for the eddy current calculation, especially when massive iron parts are involved. Generally the conductivity is measured on samples of raw materials wit...

Métallurgie / Guy Murry, Robert Lévêque | Murry, Guy (1930-2010). Auteur

Métallurgie / Guy Murry, Robert Lévêque

Livre | Murry, Guy (1930-2010). Auteur | 2015 - 3e édition

"Cet aide-mémoire rassemble les informations de base essentielles au choix et à l'utilisation des métaux. Il rappelle les notions de métallurgie physique indispensables et aborde de manière détaillée : la spécificité et le comport...

Mise en place d'une chaufferie au bois : étude et installation d'une unité à alimentation automatique / coordination Jean-Christophe Pouët |

Mise en place d'une chaufferie au bois : étude et installation d'une unité ...

Livre | 2007

Magneto-thermal characterization of bulk forged magnetic steel used in claw pole machine | Jamil, Meryeme

Magneto-thermal characterization of bulk forged magnetic steel used in claw...

Archive ouverte: Article de revue

Jamil, Meryeme | 2020-05

International audience. During the operation of Claw Pole (CP) machines, and for some operating loads, the magnetic core temperature can reach 180°C in some hot spots. As a consequence, the core electromagnetic prop...

Accumulation de chaleur / T.S. Dean | Dean, Thomas Scott. Auteur

Accumulation de chaleur / T.S. Dean

Livre | Dean, Thomas Scott. Auteur | 1979

Chargement des enrichissements...