Sensor placement for field reconstruction in rotating electrical machines | Clenet, Stéphane
/5

0 avis

Sensor placement for field reconstruction in rotating electrical machines

Archive ouverte : Article de revue

Clenet, Stéphane | Henneron, Thomas | Korecki, Julien

Edité par HAL CCSD ; Institute of Electrical and Electronics Engineers

International audience. A method is proposed to place sensors in an electrical machine in order to be able to reconstruct the magnetic field distribution. This method is based on the Empirical Interpolation Method combined with the Maxvol technique. The results applied on a surface mounted permanent magnet machine at no load show that the field distribution can be accurately reconstructed even when the sensor location is imposed in the airgap of the rotating machine.

Consulter en ligne

Suggestions

Du même auteur

Influence of uncertainties on the B(H) curves on the flux linkage of a turboalternator | Mac, Hung

Influence of uncertainties on the B(H) curves on the flux linkage of a turb...

Archive ouverte: Article de revue

Mac, Hung | 2013-11

International audience. In this paper, we analyze the influence of the uncertainties on the behavior constitutive laws of ferromagnetic materials on the behavior of a turboalternator. A simple stochastic model of an...

Multirate coupling of controlled rectifier and non-linear finite element model based on Waveform Relaxation Method | Pierquin, Antoine

Multirate coupling of controlled rectifier and non-linear finite element mo...

Archive ouverte: Article de revue

Pierquin, Antoine | 2016-01-01

International audience. To study a multirate system, each subsystem can be solved by a dedicated sofware with respect to the physical problem and the time constant. Then, the problem is the coupling of the solutions...

Error Estimator for Cauer Ladder Network Representation | Hiruma, Shingo

Error Estimator for Cauer Ladder Network Representation

Archive ouverte: Article de revue

Hiruma, Shingo | 2022

International audience. The Cauer Ladder Network (CLN) method enables to construct a reduced based circuit model of analytical or numerical models, e.g. Finite Element (FE) model, under quasistatic approximation. Th...

Du même sujet

Electronic devices and circuits / Jacob Millman, Christos C. Halkias | Millman, Jacob (1911-1991). Auteur

Electronic devices and circuits / Jacob Millman, Christos C. Halkias

Livre | Millman, Jacob (1911-1991). Auteur | 1967

Noise in electronic devices and systems / M. J. Buckingham | Buckingham, Michael J. (19..-....). Auteur

Noise in electronic devices and systems / M. J. Buckingham

Livre | Buckingham, Michael J. (19..-....). Auteur | 1983

Error Estimators for Proper Generalized Decomposition in Time-Dependent Electromagnetic Field Problems | Muller, F.

Error Estimators for Proper Generalized Decomposition in Time-Dependent Ele...

Archive ouverte: Article de revue

Muller, F. | 2020

International audience. Due to fine discretization in space and time, the simulation of transient electromagnetic phenomena results in a large system ofequations. To cope with this computational effort, model order ...

Model Order Reduction applied to a linear Finite Element model of a squirrel cage induction machine based on POD approach | Montier, L.

Model Order Reduction applied to a linear Finite Element model of a squirre...

Archive ouverte: Article de revue

Montier, L. | 2021-03-17

International audience. The Proper Orthogonal Decomposition (POD) approach is applied to a linear Finite Element (FE) model of a squirrel cage induction machine. In order to obtain a reduced model valid on the whole...

Solving Magnetodynamic Problems via Normal Form Method | Ugwuanyi, Nnaemeka S.

Solving Magnetodynamic Problems via Normal Form Method

Archive ouverte: Article de revue

Ugwuanyi, Nnaemeka S. | 2022-03

International audience. Closed-form formulations are difficult to find when the material behavior law is nonlinear. A linear approximation, on the otherhand, has a very narrow range of validity. In this communicatio...

The effect of punching on electrical machine | El Youssef, Mohamad

The effect of punching on electrical machine

Archive ouverte: Article de revue

El Youssef, Mohamad | 2019-07-24

International audience. This work enlightens the impact of punching on a specific stator performances. Two specimens type are withdrawn from a M330A35 punched lamination sheet. One type represents a closed magnetic ...

Chargement des enrichissements...