High Rectification Ratio in Polymer Diode Rectifier through Interface Engineering with Self-Assembled Monolayer

Archive ouverte : Article de revue

Ferchichi, Khaoula | Pecqueur, Sébastien | Guérin, David | Bourguiga, Ramzi | Lmimouni, Kamal

Edité par HAL CCSD ; MDPI

International audience. In this work, we demonstrate P3HT (poly 3-hexylthiophene) organic rectifier diode both in rigid and flexible substrate with a rectification ratio up to 106. This performance has been achieved through tuning the work function of gold with a self-assembled monolayer of 2,3,4,5,6-pentafluorobenzenethiol (PFBT). The diode fabricated on flexible paper substrate shows a very good electrical stability under bending tests and the frequency response is estimated at more than 20 MHz which is sufficient for radio frequency identification (RFID) applications. It is also shown that the low operating voltage of this diode can be a real advantage for use in a rectenna for energy harvesting systems. Simulations of the diode structure show that it can be used at GSM and Wi-Fi frequencies if the diode capacitance is reduced to a few pF and its series resistance to a few hundred ohms. Under these conditions, the DC voltages generated by the rectenna can reach a value up to 1 V.

Consulter en ligne

Suggestions

Du même auteur

Organic doped diode rectifier based on parylene-electronic beam lithography process for radio frequency applications | Ferchichi, Khaoula

Organic doped diode rectifier based on parylene-electronic beam lithography...

Archive ouverte: Article de revue

Ferchichi, Khaoula | 2021-10

International audience. We have adapted a "peel-off" process to structure stacked organic semiconductors (conducting polymers or small molecules) and metal layers for diode microfabrication. The fabricated devices a...

An electronic nose using conductometric gas sensors based on P3HT doped with triflates for gas detection using computational techniques (PCA, LDA, and kNN) | Boujnah, Aicha

An electronic nose using conductometric gas sensors based on P3HT doped wit...

Archive ouverte: Article de revue

Boujnah, Aicha | 2022-12

International audience. This study presents the development of an electronic nose comprising eight homemade sensors with pure P3HT and doped with different materials. The objective is to electronically identify the ...

Mildly-doped polythiophene with triflates for molecular recognition | Boujnah, Aicha

Mildly-doped polythiophene with triflates for molecular recognition

Archive ouverte: Article de revue

Boujnah, Aicha | 2021-10

International audience. Organic semiconductors have enough molecular versatility to feature chemo-specific electrical sensitivity to large families of chemical substituents via different intermolecular bonding modes...

Du même sujet

Organic doped diode rectifier based on parylene-electronic beam lithography process for radio frequency applications | Ferchichi, Khaoula

Organic doped diode rectifier based on parylene-electronic beam lithography...

Archive ouverte: Article de revue

Ferchichi, Khaoula | 2021-10

International audience. We have adapted a "peel-off" process to structure stacked organic semiconductors (conducting polymers or small molecules) and metal layers for diode microfabrication. The fabricated devices a...

Construction of flexible fiber-shaped boron-doped diamond film and its supercapacitor application | Zhang, Jing

Construction of flexible fiber-shaped boron-doped diamond film and its supe...

Archive ouverte: Article de revue

Zhang, Jing | 2023-01

International audience. Flexible fiber-shaped supercapacitors (FSSCs) are promising candidates as electrode materials for the development of deformable electronic devices. Although tremendous efforts have been focus...

Hybrid nanostructured plasmonic electrodes for flexible organic light-emitting diodes | Wu, Shiwei

Hybrid nanostructured plasmonic electrodes for flexible organic light-emitt...

Archive ouverte: Article de revue

Wu, Shiwei | 2020-09-11

International audience. Improved performance in flexible organic light-emitting diodes (OLEDs) is demonstrated by using a hybrid nanostructured plasmonic electrode consisting of silver nanowires (AgNWs) decorated wi...

Thermal analysis of ultimately-thinned-and-transfer-bonded CMOS on mechanically flexible foils | Philippe, Justine

Thermal analysis of ultimately-thinned-and-transfer-bonded CMOS on mechanic...

Archive ouverte: Article de revue

Philippe, Justine | 2019-09-06

International audience. Thinned CMOS chips transfer-bonded onto a compliant host substrate remain to date the technology of choice for applications requiring both mechanical flexibility and high frequency operation....

A CMOS Compatible Thermoelectric Device made of Crystalline Silicon Membranes with Nanopores | Bah, Thierno-Moussa

A CMOS Compatible Thermoelectric Device made of Crystalline Silicon Membran...

Archive ouverte: Article de revue

Bah, Thierno-Moussa | 2022-12-10

International audience. Herein, we report the use of nanostructured crystalline silicon as a thermoelectric material and its integration into thermoelectric devices. The proof-of-concept relies on the partial suppre...

Effet de l'angle de charge sur les harmoniques d'efforts magnétiques dans les machines synchrones à aimants permanents surfaciques | Le Besnerais, Jean

Effet de l'angle de charge sur les harmoniques d'efforts magnétiques dans l...

Archive ouverte: Communication dans un congrès

Le Besnerais, Jean | 2016-06-07

International audience. Cet article étudie l'effet de l'angle de charge sur les efforts harmoniques de Maxwell (tangentiels et radiaux) et les bruits et vibrations d'origine magnétique dans deux machines synchrones ...

Chargement des enrichissements...