Two-Slot Coil Pitch For Five-Phase Integrated Permanent Magnet Synchronous Machine | Cousseau, R.
/5

0 avis

Two-Slot Coil Pitch For Five-Phase Integrated Permanent Magnet Synchronous Machine

Archive ouverte : Communication dans un congrès

Cousseau, R. | Romary, R. | Pusca, R. | Semail, E.

Edité par HAL CCSD ; IEEE

International audience. This paper presents a simple method to size a concentrated winding permament magnet synchronous machine when a high number of slots is needed. A classical concentrated winding machine leads to a number of pole pairs close to the number of slots to be efficient. Thanks to a two slots pitches winding, number of slots can be doubled without deteriorate the winding factor. Moreover, this specific winding is also useful to deal with embarassing magnetomotive force harmonics. The method is detailed here for a specific case of a machine with integrated power converter. Sizing of the machine is also presented and finite element simulations results show performances of this design compared to a conventional one.

Consulter en ligne

Suggestions

Du même auteur

Optimal Slot Opening Width for Magnetic Noise Reduction in Induction Motors | Le Besnerais, J.

Optimal Slot Opening Width for Magnetic Noise Reduction in Induction Motors

Archive ouverte: Article de revue

Le Besnerais, J. | 2009-12

International audience. — This paper presents a method to characterize the main magnetic force waves occurring in a sinusoidally-fed induction machine. Three main force types are identified: slotting force waves, wi...

A Novel Five-Phase Fractional Slot Concentrated Winding with Low Space Harmonic Contents | Zhao, B.

A Novel Five-Phase Fractional Slot Concentrated Winding with Low Space Harm...

Archive ouverte: Article de revue

Zhao, B. | 2021-06

International audience. In this article, a novel five-phase fractional-slot concentrated winding (FSCW) with 20-slot/22-pole is presented. It benefits notonly the advantages of conventional FSCW but also weak space ...

Sensorless Control of a Seven-phase Non-sinusoidal Permanent Magnet Synchronous Machine Using High Frequency Signal Injection Method | Huang, Y.

Sensorless Control of a Seven-phase Non-sinusoidal Permanent Magnet Synchro...

Archive ouverte: Communication dans un congrès

Huang, Y. | 2021-12

International audience. This paper presents a sensorless control strategy for seven-phase non-sinusoidal permanent magnet synchronous machine (NSPMSM) with high frequency signal injection (HFSI) method in 5th harmon...

Du même sujet

MULTI-PHYSICS DESIGN RULES USING LUMPED MODELS FOR A PERMANENT MAGNET SYNCHRONOUS MACHINE | Bracikowski, Nicolas

MULTI-PHYSICS DESIGN RULES USING LUMPED MODELS FOR A PERMANENT MAGNET SYNCH...

Archive ouverte: Article de revue

Bracikowski, Nicolas | 2013-09

International audience. Modeling the dynamic behavior of electrical machines involves several fields of physics, such as electromagnetics, electronics, mechanics, thermodynamics and acoustics. Multi-physics lumped m...

Vibro-Acoustic Optimization of a Permanent Magnet Synchronous Machine Using The Experimental Design Method | Vivier, Stephane

Vibro-Acoustic Optimization of a Permanent Magnet Synchronous Machine Using...

Archive ouverte: Article de revue

Vivier, Stephane | 2006-06

International audience. —The aim of this paper is to use an analytical multi-physical model – electromagnetic, mechanic and acoustic – in order to predict the electromagnetic noise of a permanent magnet synchronous ...

Design and magnetic noise reduction of the Surface Permanent Magnet Synchronous Machine using complex airgap permeance | Fakam, Mathias

Design and magnetic noise reduction of the Surface Permanent Magnet Synchro...

Archive ouverte: Article de revue

Fakam, Mathias | 2015

International audience. Nowadays, the development of the electric motorization for land vehicles is essential since the energetic challenge has become very critical. This paper presents the development of a tool use...

Investigation on Model Predictive Control of a Five-Phase Permanent Magnet Synchronous Machine under Voltage and Current limits | Kestelyn, Xavier

Investigation on Model Predictive Control of a Five-Phase Permanent Magnet ...

Archive ouverte: Communication dans un congrès

Kestelyn, Xavier | 2015-03

The optimal control of electrical drives necessitates to take into account current and voltage limits that are imposed by the power electronics and the electrical machines. Let’s cite for example the flux-weakening operation of el...

Torque Ripple Eliminations for Multiphase Nonsinusoidal Permanent Magnet Synchronous Machines | Vu, Duc Tan

Torque Ripple Eliminations for Multiphase Nonsinusoidal Permanent Magnet Sy...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2021-04-15

International audience. This paper is to propose a control scheme, a combination of the classical field-oriented control (FOC) technique and artificial intelligence (AI), to obtain constant torques in multiphase non...

Fault-tolerant control of non-sinusoidal multiphase permanent magnet synchronous machine drives under constraints on current and voltage for automotive applications. Commande tolérante aux défauts des entraînements de machines synchrones à aimants permanents polyphasées non-sinusoïdales sous contraintes de courant et de tension pour les applications automobiles | Vu, Duc Tan

Fault-tolerant control of non-sinusoidal multiphase permanent magnet synchr...

Archive ouverte: Thèse

Vu, Duc Tan | 2020-11-24

Electric drives for electrified vehicles need to fulfil some specific requirements from automotive markets such as high efficiency, high volume power and torque densities, low-cost but safe-to-touch, high functional reliability, h...

Chargement des enrichissements...