Sensorless Control of a Seven-phase Non-sinusoidal Permanent Magnet Synchronous Machine Using High Frequency Signal Injection Method

Archive ouverte : Communication dans un congrès

Huang, Y. | Gong, J. | Zhu, Y. | Tan, F. | Tian, W. | Semail, E. | Nguyen, N-K.

Edité par HAL CCSD ; IEEE

International audience. This paper presents a sensorless control strategy for seven-phase non-sinusoidal permanent magnet synchronous machine (NSPMSM) with high frequency signal injection (HFSI) method in 5th harmonic subspace. Seven-phase nonsinusoidal machine benefits high torque density due to the use of third harmonic components. Firstly, two torque generation strategy in different harmonic subspaces with the minimum injected rms value and amplitude of current is deduced in this paper. Secondly, in order to reinforce the reliabilities of multiphase machine, the HFSI sensorless control is employed. Comparing with traditional HFSI method, the proposed control strategy is achieved in 5th harmonic subspace, which can avoid the torque ripple caused by the injected signal. Finally, according to simulations results the two torque distribution method is validated and compared and the effectiveness of the HFSI method is verified.

Consulter en ligne

Suggestions

Du même auteur

A Novel Five-Phase Fractional Slot Concentrated Winding with Low Space Harmonic Contents | Zhao, B.

A Novel Five-Phase Fractional Slot Concentrated Winding with Low Space Harm...

Archive ouverte: Article de revue

Zhao, B. | 2021-06

International audience. In this article, a novel five-phase fractional-slot concentrated winding (FSCW) with 20-slot/22-pole is presented. It benefits notonly the advantages of conventional FSCW but also weak space ...

Two-Slot Coil Pitch For Five-Phase Integrated Permanent Magnet Synchronous Machine | Cousseau, R.

Two-Slot Coil Pitch For Five-Phase Integrated Permanent Magnet Synchronous ...

Archive ouverte: Communication dans un congrès

Cousseau, R. | 2020-08

International audience. This paper presents a simple method to size a concentrated winding permament magnet synchronous machine when a high number of slots is needed. A classical concentrated winding machine leads t...

Du même sujet

Current Harmonic Eliminations for Seven-Phase Non-sinusoidal PMSM Drives applying Artificial Neurons | Vu, Duc Tan

Current Harmonic Eliminations for Seven-Phase Non-sinusoidal PMSM Drives ap...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2020-12-01

International audience. This study is to deal with unwanted current harmonics in rotating (d-q) frames of a 7-phase non-sinusoidal permanent magnet synchronous machine (PMSM) in a wye-connected winding topology. The...

Torque Ripple Eliminations for Multiphase Nonsinusoidal Permanent Magnet Synchronous Machines | Vu, Duc Tan

Torque Ripple Eliminations for Multiphase Nonsinusoidal Permanent Magnet Sy...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2021-04-15

International audience. This paper is to propose a control scheme, a combination of the classical field-oriented control (FOC) technique and artificial intelligence (AI), to obtain constant torques in multiphase non...

Fault-Tolerant Control for Non-sinusoidal Seven-phase PMSMs with Similar Copper Losses | Vu, Duc Tan

Fault-Tolerant Control for Non-sinusoidal Seven-phase PMSMs with Similar Co...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2022-07-27

International audience. This paper proposes a strategy using new transformation matrices to calculate new current references when a non-sinusoidal seven-phase permanent magnet synchronous machine (PMSM) has an open-...

Fault-tolerant Control for 7-phase Non-sinusoidal Permanent Magnet Machines with One Opened Phase | Yanagihara, Keitaro

Fault-tolerant Control for 7-phase Non-sinusoidal Permanent Magnet Machines...

Archive ouverte: Communication dans un congrès

Yanagihara, Keitaro | 2019-10-10

International audience. This paper presents new fault-tolerant control strategies for field-oriented control of 7-phase non-sinusoidal permanent magnet (PM) machines supplied by voltage source inverters (VSI). Singl...

Ssensorless control algorithms for multiphase machines in healthy and degraded mode. Développement d’algorithmes pour le contrôle sans capteur de machines électriquespolyphasées en mode normal et dégradé | Mini, Youssouf

Ssensorless control algorithms for multiphase machines in healthy and degra...

Archive ouverte: Thèse

Mini, Youssouf | 2021-09-22

Multiphase permanent magnet synchronous machines (PMSMs) have started to be used more and more in the electrification of transportation systems. These systems have several specific requirements such as: high efficiency, high power...

Fault-tolerant control of non-sinusoidal multiphase permanent magnet synchronous machine drives under constraints on current and voltage for automotive applications. Commande tolérante aux défauts des entraînements de machines synchrones à aimants permanents polyphasées non-sinusoïdales sous contraintes de courant et de tension pour les applications automobiles | Vu, Duc Tan

Fault-tolerant control of non-sinusoidal multiphase permanent magnet synchr...

Archive ouverte: Thèse

Vu, Duc Tan | 2020-11-24

Electric drives for electrified vehicles need to fulfil some specific requirements from automotive markets such as high efficiency, high volume power and torque densities, low-cost but safe-to-touch, high functional reliability, h...

Chargement des enrichissements...