Influence of uncertainties on the B(H) curves on the flux linkage of a turboalternator | Mac, Hung
/5

0 avis

Influence of uncertainties on the B(H) curves on the flux linkage of a turboalternator

Archive ouverte : Article de revue

Mac, Hung | Clenet, Stéphane | Beddek, Karim | Chevallier, Loïc | Korecki, Julien | Moreau, Olivier | Thomas, Pierre

Edité par HAL CCSD ; Wiley

International audience. In this paper, we analyze the influence of the uncertainties on the behavior constitutive laws of ferromagnetic materials on the behavior of a turboalternator. A simple stochastic model of anhysteretic nonlinear B(H) curve is proposed for the ferromagnetic yokes of the stator and the rotor. The B(H) curve is defined by five random parameters. We quantify the influence of the variability of these five parameters on the flux linkage of one phase of the stator winding depending on the excitation current I. The influence of each parameter is analyzed via the Sobol indices. With this analysis, we can determine the most influential parameters for each state of magnetization (according to the level of I) and investigate where the characterization process of the B(H) curve should focus to improve the accuracy of the computed flux linkage.

Consulter en ligne

Suggestions

Du même auteur

Stochastic Non Destructive Testing simulation: sensitivity analysis applied to material properties in clogging of nuclear power plant steam generators | Moreau, Olivier

Stochastic Non Destructive Testing simulation: sensitivity analysis applied...

Archive ouverte: Article de revue

Moreau, Olivier | 2013

International audience. A Non destructive Testing (NDT) procedure is currently used to estimate the clogging of tube support plates in French nuclear power plant steam generators. A stochastic approach has been appl...

Solution of Large Stochastic Finite Element Problems—Application to ECT-NDT. Solution of Large Stochastic Finite Element Problems – Application to ECT-NDT | Beddek, Karim

Solution of Large Stochastic Finite Element Problems—Application to ECT-NDT...

Archive ouverte: Article de revue

Beddek, Karim | 2013

This paper describes an efficient bloc iterative solver for the Spectral Stochastic Finite Element Method (SSFEM). The SSFEM was widely used to quantify the effect of input data uncertainties on the outputs of finite element model...

Topology Optimisation of a 3D Electromagnetic Device using the SIMP Density-Based Method | Mohamodhosen, Bilquis

Topology Optimisation of a 3D Electromagnetic Device using the SIMP Density...

Archive ouverte: Communication dans un congrès

Mohamodhosen, Bilquis | 2016-11-13

International audience. The presented paper proposes a topology optimisation methodology based on the density-based method SIMP, and applied to a numerical example to validate the former. The approach and methodolog...

Du même sujet

A posteriori error estimation for stochastic static problems | Mac, Hung

A posteriori error estimation for stochastic static problems

Archive ouverte: Article de revue

Mac, Hung | 2014-02-01

International audience. To solve stochastic static field problems, a discretization by the Finite Element Method can be used. A system of equations is obtained with the unknowns (scalar potential at nodes for exampl...

Consideration of dimensional uncertainties introduced by the manufacturing processes in the numeric models of the electrical machines. Prise en compte des incertitudes dimensionnelles introduites par les procédés de fabrication dans les modèles numériques de machines électriques | Liu, Sijun

Consideration of dimensional uncertainties introduced by the manufacturing ...

Archive ouverte: Thèse

Liu, Sijun | 2015-11-23

Due to their imperfections, manufacturing processes lead to deviations on the dimensions which are not equal to their nominal value and as well as a variability on the dimensions from one product to another in the case of mass pro...

Chargement des enrichissements...