Identification of a 7-phase claw-pole starter-alternator for a micro-hybrid automotive application | Bruyère, Antoine
/5

0 avis

Identification of a 7-phase claw-pole starter-alternator for a micro-hybrid automotive application

Archive ouverte : Communication dans un congrès

Bruyère, Antoine | Henneron, Thomas | Semail, Eric | Locment, Fabrice | Bouscayrol, Alain | Dubus,, J.M | Mipo, Jean-Claude

Edité par HAL CCSD ; IEEE

International audience. This paper deals with the identification of a new high power starter-alternator system, using both: a Finite Element Method (FEM) modeling and an experimental vector control. The drive is composed of a synchronous 7-phase claw-pole machine supplied with a low voltage / high current Voltage Source Inverter (VSI). This structure needs specific approaches to plan its electrical and mechanical behaviors and to identify the parameters needed for control purpose. At first, a Finite Element Method (FEM) modeling of the machine is presented. It is used for the predetermination of the electromotive forces and of the torque. Experimental results are in good accordance with numerical results. In a second part, resistive and inductive parameters of the drive are determined by an original experimental approach that takes into account each component of the drive: the battery, the VSI and the machine.

Consulter en ligne

Suggestions

Du même auteur

Identification of sensitive R-L parameters of a Multi-phase drive by a vector control | Bruyère, Antoine

Identification of sensitive R-L parameters of a Multi-phase drive by a vect...

Archive ouverte: Communication dans un congrès

Bruyère, Antoine | 2008-06

International audience. This paper focuses on an experimental method to determine the electric parameters of a seven-phase low-voltage multiphase drive. The drive is a belt driven starter-alternator for powerful car...

Modeling and Control of a 7-phase Claw-pole Starter-alternator for a Micro-hybrid Automotive Applications | Bruyère, Antoine

Modeling and Control of a 7-phase Claw-pole Starter-alternator for a Micro-...

Archive ouverte: Communication dans un congrès

Bruyère, Antoine | 2008-09

International audience. This paper deals with the modeling and the control of a new high power 12V Integrated Starter Alternator (ISA). This system is used to bring micro-hybrid functions to standard Internal Combus...

Predetermination of Currents and Field in Short-Circuit Voltage Operation for an Axial-Flux Permanent Magnet Machine | Henneron, Thomas

Predetermination of Currents and Field in Short-Circuit Voltage Operation f...

Archive ouverte: Communication dans un congrès

Henneron, Thomas | 2008-05

International audience. Risk of irreversible magnet demagnetization during short-circuit fault is analyzed in case of an axial-flux dual-rotor machine, using a three-dimensional finite-element method (3D-FEM). In or...

Du même sujet

Modeling and Control of a 7-phase Claw-pole Starter-alternator for a Micro-hybrid Automotive Applications | Bruyère, Antoine

Modeling and Control of a 7-phase Claw-pole Starter-alternator for a Micro-...

Archive ouverte: Communication dans un congrès

Bruyère, Antoine | 2008-09

International audience. This paper deals with the modeling and the control of a new high power 12V Integrated Starter Alternator (ISA). This system is used to bring micro-hybrid functions to standard Internal Combus...

Identification of sensitive R-L parameters of a Multi-phase drive by a vector control | Bruyère, Antoine

Identification of sensitive R-L parameters of a Multi-phase drive by a vect...

Archive ouverte: Communication dans un congrès

Bruyère, Antoine | 2008-06

International audience. This paper focuses on an experimental method to determine the electric parameters of a seven-phase low-voltage multiphase drive. The drive is a belt driven starter-alternator for powerful car...

Current Harmonic Eliminations for Seven-Phase Non-sinusoidal PMSM Drives applying Artificial Neurons | Vu, Duc Tan

Current Harmonic Eliminations for Seven-Phase Non-sinusoidal PMSM Drives ap...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2020-12-01

International audience. This study is to deal with unwanted current harmonics in rotating (d-q) frames of a 7-phase non-sinusoidal permanent magnet synchronous machine (PMSM) in a wye-connected winding topology. The...

Torque Ripple Eliminations for Multiphase Nonsinusoidal Permanent Magnet Synchronous Machines | Vu, Duc Tan

Torque Ripple Eliminations for Multiphase Nonsinusoidal Permanent Magnet Sy...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2021-04-15

International audience. This paper is to propose a control scheme, a combination of the classical field-oriented control (FOC) technique and artificial intelligence (AI), to obtain constant torques in multiphase non...

Fault-Tolerant Control for Non-sinusoidal Seven-phase PMSMs with Similar Copper Losses | Vu, Duc Tan

Fault-Tolerant Control for Non-sinusoidal Seven-phase PMSMs with Similar Co...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2022-07-27

International audience. This paper proposes a strategy using new transformation matrices to calculate new current references when a non-sinusoidal seven-phase permanent magnet synchronous machine (PMSM) has an open-...

Fault-tolerant Control for Non-sinusoidal Multiphase Drives with Minimum Torque Ripple | Vu, Duc Tan

Fault-tolerant Control for Non-sinusoidal Multiphase Drives with Minimum To...

Archive ouverte: Article de revue

Vu, Duc Tan | 2021-12-09

International audience. For non-sinusoidal electromotive force (NS-EMF) multiphase machines, this paper proposes a new strategy and control scheme to guarantee smooth torque under an open-phase fault. Notably, the c...

Chargement des enrichissements...