Model predictive optimal control considering current and voltage limitations: Real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines

Archive ouverte : Article de revue

Bermudez Guzman, Mario | Gomozov, Oleg | Kestelyn, Xavier | Barrero, Federico | Nguyen, Ngac Ky | Semail, Eric

Edité par HAL CCSD ; Elsevier

International audience. Multiphase machines have recently gained interest in the research community for their use in applications where high power density, wide speed range and fault-tolerant capabilities are required. The optimal control of such drives requires the consideration of voltage and current limits imposed by the power converter and the machine. While conventional three-phase drives have been extensively analyzed taking into account such limits, the same cannot be said in the multiphase drives’ case. This paper deals with this issue, where a novel two-stage Model Predictive optimal Control (2S-MPC) technique is presented, and a five-phase permanent magnet synchronous multiphase machine (PMSM) is used as a case example. The proposed method first applies a Continuous-Control-Set Model Predictive Control (CCS-MPC) stage to obtain the optimal real-time stator current reference for given DC-link voltage and stator current limits, exploiting the maximum performance characteristics of the multiphase drive. Then, a Finite-Control-Set Model Predictive Control (FCS-MPC) stage is utilized to generate the switching state in the power converter and force the stator current tracking. An experimental validation of the proposed controller is finally provided using a real-time simulation environment based on OPAL-RT technologies.

Consulter en ligne

Suggestions

Du même auteur

Real-Time Validation of a Cascaded Model Predictive Control Technique for a Five-Phase Permanent Magnet Synchronous Machine Under Current and Voltage Limits | Bermudez Guzman, Mario

Real-Time Validation of a Cascaded Model Predictive Control Technique for a...

Archive ouverte: Communication dans un congrès

Bermudez Guzman, Mario | 2017-07

International audience. Multiphase machines have recently gained importance in the research community for their use in applications where high power density, wide speed range and fault-tolerant capabilities are need...

Open-Phase Fault Operation of 5-Phase Induction Motor Drives using DTC Techniques | Bermudez Guzman, Mario

Open-Phase Fault Operation of 5-Phase Induction Motor Drives using DTC Tech...

Archive ouverte: Communication dans un congrès

Bermudez Guzman, Mario | 2015-11

International audience. Direct torque control (DTC) is extensively used in conventional three-phase drives as an alternative to field-oriented control methods. The standard DTC technique was originally designed to r...

Sensitivity of predictive controllers to parameter variation in five-phase induction motor drives | Martin, Cristina

Sensitivity of predictive controllers to parameter variation in five-phase ...

Archive ouverte: Article de revue

Martin, Cristina | 2017

International audience. Model predictive control techniques have been recently proposed as a viable control alternative for power converters and electrical drives. The good current tracking, flexible control design ...

Du même sujet

Real-Time Validation of a Cascaded Model Predictive Control Technique for a Five-Phase Permanent Magnet Synchronous Machine Under Current and Voltage Limits | Bermudez Guzman, Mario

Real-Time Validation of a Cascaded Model Predictive Control Technique for a...

Archive ouverte: Communication dans un congrès

Bermudez Guzman, Mario | 2017-07

International audience. Multiphase machines have recently gained importance in the research community for their use in applications where high power density, wide speed range and fault-tolerant capabilities are need...

Torque optimization of seven phase BLDC machines in normal and degraded modes with constraints on current and voltage | Vu, Duc Tan

Torque optimization of seven phase BLDC machines in normal and degraded mod...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2018-04-17

International audience. This paper proposes several easy-to-implement control strategies when seven-phase axial flux brushless DC machines with trapezoidal back electromotive forces operate in normaland faulty modes...

Different possibilities of multiphase drives functioning in constant power region | Nguyen, Ngac Ky

Different possibilities of multiphase drives functioning in constant power ...

Archive ouverte: Communication dans un congrès

Nguyen, Ngac Ky | 2018-11-04

International audience

Investigation on Model Predictive Control of a Five-Phase Permanent Magnet Synchronous Machine under Voltage and Current limits | Kestelyn, Xavier

Investigation on Model Predictive Control of a Five-Phase Permanent Magnet ...

Archive ouverte: Communication dans un congrès

Kestelyn, Xavier | 2015-03

The optimal control of electrical drives necessitates to take into account current and voltage limits that are imposed by the power electronics and the electrical machines. Let’s cite for example the flux-weakening operation of el...

Visual soft landing of an autonomous quadrotor on a moving pad using a combined fuzzy velocity control with model predictive control | Bouaiss, Oussama

Visual soft landing of an autonomous quadrotor on a moving pad using a comb...

Archive ouverte: Article de revue

Bouaiss, Oussama | 2023-02

International audience. Autonomous landing is a vital option for Unmanned Aerial vehicles (UAV), as it can be a fail-safe in many critical cases. This paper demonstrates a complete solution for the soft landing appl...

Generalized Vectorial Formalism – based multiphase series-connected motors control | Semail, Eric

Generalized Vectorial Formalism – based multiphase series-connected motors ...

Archive ouverte: Communication dans un congrès

Semail, Eric | 2015-10

Multiphase drives are more and more used in specific applications leading to a necessity of control strategy development. This paper presents the Generalized Vectorial Formalism (GVF) theory to control multiphase series-connected ...

Chargement des enrichissements...