Canal lock variable speed hydropower turbine design and control

0 avis

Canal lock variable speed hydropower turbine design and control

Archive ouverte : Article de revue

Edité par HAL CCSD ; Wiley

International audience. The design of a novel submerged hydraulic turbine for producing electricity by converting the available hydropower on canal locks during raising and lowering ships, but with the minimum overall impact on the facility, is being considered. The hydraulic head in such applications is low (few meters) and varies over time (from its maximum value down to zero) resulting in a low potential conversion of hydraulic head in electrical energy. The study involves the modification of the hydraulic transient system, the design and performance estimation of a hydraulic turbine. Based on the performance curves, a permanent magnet Vernier generator is designed. The models of hydraulic turbine and generator are added to the system model and simulations results of the whole system are presented.

Langue: Anglais

Date de publication: 2018-10-29

Source: ISSN: 1752-1416

Sujets

Consulter en ligne

Consulter le document

Suggestions

Du même auteur

Canal lock variable speed hydropower turbine energy conversion system

Archive ouverte: Communication dans un congrès

Zhang, Jian | 2017-04-11

International audience

Quantitative Design of a High Performance Permanent Magnet Vernier Generato...

Archive ouverte: Article de revue

Zhang, Jian | 2017

International audience. Permanent-magnet vernier machines are becoming more and more attractive due to their high torque density and low-speed operating capabilities. This paper investigates the effects of the magne...

Résistance des matériaux : Ecoles d'ingénieurs, préparation à l'agrégation ...

Livre | Kerguignas, Marcel - Ingénieur A&M. Auteur | 1977 - 4e édition

Du même sujet

La théorie politique de l'individualisme possessif : de Hobbes à Locke / C....

Livre | Macpherson, Crawford Brough (1911-1987). Auteur | 2004

Traité du gouvernement civil / John Locke

Livre | Locke, John (1632-1704). Auteur | 1992 - [2e édition corrigée]

Vectorial Approach Based Control of a Seven-Phase Axial Flux Machine Design...

Archive ouverte: Article de revue

Locment, Fabrice | 2008-10

Version éditeur disponible à l'adresse suivante : http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4519973&isnumber=4636792. International audience. This paper deals with easy-to-implement control strategies ...

Fault Detection, Isolation and Control Reconfiguration of Three-Phase PMSM ...

Archive ouverte: Communication dans un congrès

Meinguet, Fabien | 2011-06-28

International audience. This paper deals with on-line software fault detection and isolation method for a drive composed of a fourleg inverter and a three-phase permanent magnet synchronous machine. The considered f...

Flux-weakening operation of open-end winding drive integrating a cost effec...

Archive ouverte: Article de revue

Sandulescu, Paul | 2013-01

International audience. In this paper, a three-phase drive with a six-leg Voltage Source Inverter (VSI) and an open-end winding Interior Permanent Magnet Synchronous Machine (IPMSM) designed for the traction of an e...

Five-phase SPM machine with electronic pole changing effect for marine prop...

Archive ouverte: Communication dans un congrès

Zahr, Hussein | 2016-11

International audience. In this paper, the possibility of designing a five-phase Surface-mounted Permanent Magnet (SPM) machine with 20 slots and 8 poles for a low power marine propulsion system is examined. Due to ...

Chargement des enrichissements...