Finite-Element Model Reduction of Surface-Mounted Permanent Magnet Machines by Exploitation of Geometrical Periodicity

Archive ouverte : Article de revue

Al Eit, M. | Clenet, S. | Henneron, T.

Edité par HAL CCSD ; Institute of Electrical and Electronics Engineers

International audience. This paper presents a methodology that allows taking advantage of the geometrical periodicity of electrical machines together with the modeling of rotor motion. It enables by means of the discrete Fourier transform (DFT) to reduce the large-scale system obtained from the finite-element model to several smaller independent subsystems, allowing a shortening of the computational time. Due to DFT properties, the computational time can be more reduced especially when we consider the inter-dependence of the spectral components under either balanced or unbalanced supply condition. In addition, a further reduction is possible in the case of balanced regimes where the distribution of the eventual numerical solution is governed by a limited number of prevailing harmonics.

Consulter en ligne

Suggestions

Du même auteur

Model Order Reduction applied to a linear Finite Element model of a squirrel cage induction machine based on POD approach | Montier, L.

Model Order Reduction applied to a linear Finite Element model of a squirre...

Archive ouverte: Article de revue

Montier, L. | 2021-03-17

International audience. The Proper Orthogonal Decomposition (POD) approach is applied to a linear Finite Element (FE) model of a squirrel cage induction machine. In order to obtain a reduced model valid on the whole...

Surrogate Model Based on the POD Combined With the RBF Interpolation of Nonlinear Magnetostatic FE Model | Henneron, T.

Surrogate Model Based on the POD Combined With the RBF Interpolation of Non...

Archive ouverte: Article de revue

Henneron, T. | 2020-01

International audience. The Proper Orthogonal Decomposition (POD) is an interesting approach to compress into a reduced basis numerous solutions obtained from a parametrized Finite Element (FE) model. In order to ob...

Model Order Reduction of Electrical Machines with Multiple Inputs | Farzam Far, M.

Model Order Reduction of Electrical Machines with Multiple Inputs

Archive ouverte: Article de revue

Farzam Far, M. | 2017

International audience. In this paper, proper orthogonal decomposition method is employed to build a reduced-order model from a high-order nonlinear permanent magnet synchronous machinemodel with multiple inputs. Th...

Du même sujet

Stabilized Gauged Formulation of Darwin Model for FEM Computation of Industrial Applications | Taha, Houssein

Stabilized Gauged Formulation of Darwin Model for FEM Computation of Indust...

Archive ouverte: Article de revue

Taha, Houssein | 2022-09-01

International audience. The Darwin model, which simultaneously incorporates resistive, capacitive, and inductive effects but neglects the radiation one, has recently attracted more and more attention in the research...

Exploitation of independent stator and rotor geometrical periodicities in electrical machines using the Schur complement | Al Eit, Moustafa

Exploitation of independent stator and rotor geometrical periodicities in e...

Archive ouverte: Article de revue

Al Eit, Moustafa | 2019

International audience. In this paper we present a-priori model reduction technique that enables to take full advantage of the periodicity existing in the stator and rotor geometrical structures of electrical machin...

Surrogate Model Based on the POD Combined With the RBF Interpolation of Nonlinear Magnetostatic FE Model | Henneron, T.

Surrogate Model Based on the POD Combined With the RBF Interpolation of Non...

Archive ouverte: Article de revue

Henneron, T. | 2020-01

International audience. The Proper Orthogonal Decomposition (POD) is an interesting approach to compress into a reduced basis numerous solutions obtained from a parametrized Finite Element (FE) model. In order to ob...

Model-Order Reduction of Magnetoquasi-Static Problems Based on POD and Arnoldi-Based Krylov Methods | Pierquin, Antoine

Model-Order Reduction of Magnetoquasi-Static Problems Based on POD and Arno...

Archive ouverte: Communication dans un congrès

Pierquin, Antoine | 2014-05

The proper orthogonal decomposition method and Arnoldi-based Krylov projection method are investigated in order to reduce a finite-element model of a quasi-static problem. Both methods are compared on an academic example in terms ...

A priori error estimation of the structure-preserving modal model reduction by state residualization of a grid forming converter for use in 100% power electronics transmission systems | Cossart, Quentin

A priori error estimation of the structure-preserving modal model reduction...

Archive ouverte: Communication dans un congrès

Cossart, Quentin | 2019-02

International audience. This article deals with the model order reduction by state residualization of power electronic converters. It presents a method to a priori estimate the error induced by this reduction. This ...

Parametric Geometric Metamodel of Nonlinear Magnetostatic Problem Based on POD and RBF Approaches | Boumesbah, Allaa Eddine

Parametric Geometric Metamodel of Nonlinear Magnetostatic Problem Based on ...

Archive ouverte: Article de revue

Boumesbah, Allaa Eddine | 2022

International audience. A parametric geometric metamodel is built for a nonlinear magnetostatic problem, using proper orthogonal decomposition approach combined with radial basis functions interpolation. Furthermore...

Chargement des enrichissements...