Dimensional analysis for planetary mixer: Mixing time and Reynolds numbers

Archive ouverte : Article de revue

Delaplace, Guillaume | Thakur, Rajeev | Bouvier, L. | André, C. | Torrez, C.

Edité par HAL CCSD ; Elsevier

Mixing time number is a convenient parameter to characterize mixing performance of stirred tanks. This dimensionless number is now well established for agitated vessels equipped with vertically and centrally mounted impeller for Newtonian as well as for non-Newtonian fluids. To our knowledge, there is more ambiguity concerning its definition for planetary mixers especially when they have dual motion (around two perpendicular axes) to achieve homogenization. In this study, dimensional analysis of mixing time and reliability of the modified Reynolds and mixing time numbers are proposed for such a planetary mixer particularly named as TRIAXE (R) system. These two numbers are based on the maximum tip speed of mixer as the characteristic velocity. Modified dimensionless numbers are consistent with the definition of conventional Reynolds and mixing numbers (when only one revolving motion around the vertical axis of the mixing device occurs in the vessel). Mixing time experiments with TRIAXE (R) mixer for highly viscous Newtonian fluids showed that the proposed modified Reynolds and mixing time numbers succeeded to obtain a unique mixing curve irrespective of the different speed ratio chosens. This agreement proves that the proposed modified dimensionless numbers can be well adapted for engineering purposes and they can be used to compare the mixing performance of planetary mixers.

Consulter en ligne

Suggestions

Du même auteur

Experimental and CFD Simulation of Heat Transfer to Highly Viscous Fluids in an Agitated Vessel Equipped With a non Standard Helical Ribbon Impeller | Delaplace, Guillaume

Experimental and CFD Simulation of Heat Transfer to Highly Viscous Fluids i...

Archive ouverte: Article de revue

Delaplace, Guillaume | 2001-11

Influence of Rheological Behavior of Purely Viscous Fluids on Analytical Residence Time Distribution in Straight Tubes | Delaplace, Guillaume

Influence of Rheological Behavior of Purely Viscous Fluids on Analytical Re...

Archive ouverte: Article de revue

Delaplace, Guillaume | 2008-02

In an effort to better understand the homogeneity of heat treatment of foodstuffs in holding tubes, the cumulative residence time distribution function is derived for a Herschel-Bulkley fluid from fully developed laminar flow in a...

Determination of Mixing Times with Helical Ribbon Impeller for Non-Newtonian Viscous Fluids Using an Advanced Imaging Method | Chhabra, R.

Determination of Mixing Times with Helical Ribbon Impeller for Non-Newtonia...

Archive ouverte: Article de revue

Chhabra, R. | 2007-12

New results on mixing times for viscous Newtonian and non-Newtonian fluids being homogenized with a helical ribbon impeller are presented. In particular, a recently developed technique to determine the macromixing kinetics of an i...

Du même sujet

Dimensional analysis of a planetary mixer for homogenizing of free flowing powders: Mixing time and power consumption | Andre, C.

Dimensional analysis of a planetary mixer for homogenizing of free flowing ...

Archive ouverte: Article de revue

Andre, C. | 2012-08

International audience. Powder mixing is crucial to the processing stages in many industries. However, there is still a paucity of information about the effects of process parameters on mixing efficiency. This paper...

Hydrodynamics of a planetary mixer used for dough process: Influence of impeller speeds ratio on the power dissipated for Newtonian fluids | Auger, Frederic

Hydrodynamics of a planetary mixer used for dough process: Influence of imp...

Archive ouverte: Article de revue

Auger, Frederic | 2013

The objective of this paper is to better characterize the influence of process parameters (impeller revolution speeds) on the performance of a planetary flour-beater mixer (mixer bowl P600 from Brabender) used in dough production....

Power requirement for mixing shear-thinning fluids with a planetary mixer | Auger, F.

Power requirement for mixing shear-thinning fluids with a planetary mixer

Archive ouverte: Article de revue

Auger, F. | 2015

The optimal control of processes dealing with non-Newtonian liquids requires the knowledge and control of the power demand of the mixing equipment. In this context, an extension of the Metzner and Otto concept to planetary mixers ...

Determination of Mixing Times with Helical Ribbon Impeller for Non-Newtonian Viscous Fluids Using an Advanced Imaging Method | Chhabra, R.

Determination of Mixing Times with Helical Ribbon Impeller for Non-Newtonia...

Archive ouverte: Article de revue

Chhabra, R. | 2007-12

New results on mixing times for viscous Newtonian and non-Newtonian fluids being homogenized with a helical ribbon impeller are presented. In particular, a recently developed technique to determine the macromixing kinetics of an i...

Chargement des enrichissements...