Solution of Large Stochastic Finite Element Problems—Application to ECT-NDT. Solution of Large Stochastic Finite Element Problems – Application to ECT-NDT | Beddek, Karim
/5

0 avis

Solution of Large Stochastic Finite Element Problems—Application to ECT-NDT. Solution of Large Stochastic Finite Element Problems – Application to ECT-NDT

Archive ouverte : Article de revue

Beddek, Karim | Clenet, Stéphane | Moreau, Olivier | Le Menach, Yvonnick

Edité par HAL CCSD ; Institute of Electrical and Electronics Engineers

This paper describes an efficient bloc iterative solver for the Spectral Stochastic Finite Element Method (SSFEM). The SSFEM was widely used to quantify the effect of input data uncertainties on the outputs of finite element models. The bloc iterative solver allows reducing computational cost of the SSFEM. The method is applied on an industrial Non Destructive Testing (NDT) problem. The numerical performances of the method are compared with those of the Non-Intrusive Spectral Projection (NISP).

Consulter en ligne

Suggestions

Du même auteur

Stochastic Non Destructive Testing simulation: sensitivity analysis applied to material properties in clogging of nuclear power plant steam generators | Moreau, Olivier

Stochastic Non Destructive Testing simulation: sensitivity analysis applied...

Archive ouverte: Article de revue

Moreau, Olivier | 2013

International audience. A Non destructive Testing (NDT) procedure is currently used to estimate the clogging of tube support plates in French nuclear power plant steam generators. A stochastic approach has been appl...

Influence of uncertainties on the B(H) curves on the flux linkage of a turboalternator | Mac, Hung

Influence of uncertainties on the B(H) curves on the flux linkage of a turb...

Archive ouverte: Article de revue

Mac, Hung | 2013-11

International audience. In this paper, we analyze the influence of the uncertainties on the behavior constitutive laws of ferromagnetic materials on the behavior of a turboalternator. A simple stochastic model of an...

Space-time residual-based a posteriori estimator for the A-phi formulation in eddy current problems | Tittarelli, Roberta

Space-time residual-based a posteriori estimator for the A-phi formulation ...

Archive ouverte: Article de revue

Tittarelli, Roberta | 2015

International audience. In this paper, an a posteriori residual error estimator is presented for the 3-D eddy current problem modeled by the space-time A - φ potential formulation. It is solved by the finite element...

Du même sujet

Optimization and reliability analysis for electrical machines modeled by finite element method. Optimisation et analyse de fiabilité des machines électriques modélisées par la méthode des éléments finis | El Bechari, Reda

Optimization and reliability analysis for electrical machines modeled by fi...

Archive ouverte: Thèse

El Bechari, Reda | 2020-09-17

The finite element method is the most sophisticated tool to model the electromagnetic phenomenon. However, it is computationally expensive. Thus, its usage for optimization and reliability analysis (iterative processes) should be ...

Contribution to taking into account iron losses in the modeling of electrical machines by finite elements method.. CONTRIBUTION A LA PRISE EN COMPTE DES PERTES FER DANS LA MODELISATION DES MACHINES ELECTRIQUES PAR ELEMENTS FINIS | Fratila, Mircea

Contribution to taking into account iron losses in the modeling of electric...

Archive ouverte: Thèse

Fratila, Mircea | 2012-12-19

Taking into account the iron losses in electromechanical machines is a crucial step during the design process. The aim of this study was to validate the implementation of an iron loss model and at the same time perform an accurate...

Multirate coupling of controlled rectifier and non-linear finite element model based on Waveform Relaxation Method | Pierquin, Antoine

Multirate coupling of controlled rectifier and non-linear finite element mo...

Archive ouverte: Article de revue

Pierquin, Antoine | 2016-01-01

International audience. To study a multirate system, each subsystem can be solved by a dedicated sofware with respect to the physical problem and the time constant. Then, the problem is the coupling of the solutions...

Accurate Projection Method of Source Quantities in Coupled Finite-Element Problems | Parent, Guillaume

Accurate Projection Method of Source Quantities in Coupled Finite-Element P...

Archive ouverte: Article de revue

Parent, Guillaume | 2009

International audience. Projecting discrete quantities from one mesh to another one is a critical operation which is usually required in multiphysical problems. The efficiency of a Galerkin projection method is stud...

Reduction of a Finite Element Parametric Model using Adaptive POD Methods – Application to uncertainty quantification | Clenet, Stéphane

Reduction of a Finite Element Parametric Model using Adaptive POD Methods –...

Archive ouverte: Article de revue

Clenet, Stéphane | 2015-12-01

International audience. Model Order Reduction (MOR) methods enable reduction of the computation time when dealing with parametrized numerical models. Among these methods, the Proper Orthogonal Decomposition (POD) me...

Optimisation strategies using the Experimental Design Method and Application to electrotechnical devices modelled by finite elements. Stratégies d'optimisation par la méthode des Plans d'Expériences, et Application aux dispositifs électrotechniques modélisés par Eléments Finis | Vivier, Stéphane

Optimisation strategies using the Experimental Design Method and Applicatio...

Archive ouverte: Thèse

Vivier, Stéphane | 2002-07-11

The work presented in this memoir deals with the application of the Experimental Design Method (EDM) to the study and the optimisation of electrotechnical devices. The finite element modelling stands as the privileged analysis too...

Chargement des enrichissements...