0 avis
Preparation of nanowires on free-standing boron-doped diamond films for high performance micro-capacitors
Archive ouverte : Article de revue
International audience. A free-standing nanostructured boron-doped diamond (BDD) electrode was fabricated by reactive ion etching (RIE) with oxygen plasma. The free-standing architecture and nanowires endowed the BDD electrode with high specific capacitance and good stability. As a result, the BDD nanowires electrode etched for 60 min (BDD-NWs-60) featured the best capacitive performance with a specific capacitance of 24.9 mF cm−2 at a scan rate of 10 mV s−1 and capacitance retention of 90% after 6,000 cycles at a constant current density of 1.0 mA cm−2. Furthermore, a symmetric capacitor device was assembled using two BDD-NWs-60 electrodes, the device exhibited the highest energy and power densities of 0.41 mJ cm−2 and 0.79 mW cm−2, respectively. For a practical application, three BDD-NWs-60//BDD-NWs-60 symmetrical capacitors in series could light a red LED and rotate a homemade fan. Based on the above satisfactory behavior of the BDD electrode, the influence of the RIE process on the capacitive performance of the BDD electrode was proposed.
Consulter en ligne
Suggestions
Du même auteur
Du même sujet
