An Efficient Control of a Series Connected Two-Synchronous Motor 5-Phase with Non Sinusoidal EMF Supplied by a Single 5-leg VSI: Experimental and Theoretical Investigations

Archive ouverte : Article de revue

Mekri, Fatiha | Charpentier, Jean Fréderic | Semail, Eric

Edité par HAL CCSD ; Elsevier

International audience. This paper proposes the control scheme of an original drive which is made up of two 5-phase permanent magnet synchronous machines (PMSM) connected in series. Even if the Electro-Motive Forces (EMF) are trapezoidal, it is possible, by using a special series connection between the two machines and by implementing a special vector control, to impose independent torques and speeds with a single fiveleg Voltage Source Inverter (VSI). If special series-connection with classical vector control is sufficient to achieve flux/torque decoupling when the EMFs are sinusoidal, it is necessary to modify the control scheme when the EMFs are not sinusoidal. Simulations and experimental results demonstrate the efficiency of the independent control of the two 5-phase synchronous machines connected in series, and the efficiency of the proposed improved control for different loads.

Consulter en ligne

Suggestions

Du même auteur

Étude comparative de différents correcteurs pour la commande optimale avec défauts d'une machine pentaphasée | Mekri, Fatiha

Étude comparative de différents correcteurs pour la commande optimale avec ...

Archive ouverte: Article de revue

Mekri, Fatiha | 2012-04

La version éditeur de cet article est accessible à l'adresse suivante : doi:10.3166/ejee.15.377-400. International audience. The use of multiphase PM synchronous machines associated with VSI drives appears to be a v...

Commande avec prise en compte de défauts d’ouverture de phase d’une machine pentaphasée à aimants associée à un onduleur de tension MLI | Mekri, Fatiha

Commande avec prise en compte de défauts d’ouverture de phase d’une machine...

Archive ouverte: Communication dans un congrès

Mekri, Fatiha | 2010-07

Cet article est consacré à l’étude d’une méthode de commande d’une machine synchrone à aimant permanent à cinq phasesassociée à un onduleur de tension à MLI intersective. On s’intéresse au cas de la commande en mode normal et en m...

Paramètres clés pour la conception d'une machine pentaphasée à aimants à double polarité | Zahr, Hussein

Paramètres clés pour la conception d'une machine pentaphasée à aimants à do...

Archive ouverte: Communication dans un congrès

Zahr, Hussein | 2014-07

National audience. Les systèmes de propulsion automobile ou navale nécessitent des entraînements électromécaniques compacts. Lorsque le diamètre alloué à la machine est faible, la mise en oeuvre d'une solution à gra...

Du même sujet

Five-phase SPM machine with electronic pole changing effect for marine propulsion | Zahr, Hussein

Five-phase SPM machine with electronic pole changing effect for marine prop...

Archive ouverte: Communication dans un congrès

Zahr, Hussein | 2016-11

International audience. In this paper, the possibility of designing a fivephase Surface-mounted Permanent Magnet (SPM) machine with 20 slots and 8 poles for a low power marine propulsion systemis examined. Due to it...

Maximum reachable torque, power and speed for five-phase SPM machine with low armature reaction | Scuiller, Franck

Maximum reachable torque, power and speed for five-phase SPM machine with l...

Archive ouverte: Article de revue

Scuiller, Franck | 2016

International audience. Abstract—In this paper, the study of the torque and power versus speed characteristics for a family of five-phase Surface-mounted Permanent Magnet (SPM) machine is carried out. With consideri...

Design Considerations of Five-Phase Machine with Double p/3p Polarity | Gong, Jinlin

Design Considerations of Five-Phase Machine with Double p/3p Polarity

Archive ouverte: Article de revue

Gong, Jinlin | 2018

International audience. In the context of traction drives with required torque transient capabilities and a classically wide flux weakening speed range, this paper gives design considerations of a particularDouble-P...

Maximum Torque Per Ampere Strategy for a Biharmonic Five-phase Synchronous Machine | Zahr, Hussein

Maximum Torque Per Ampere Strategy for a Biharmonic Five-phase Synchronous ...

Archive ouverte: Communication dans un congrès

Zahr, Hussein | 2016-06-22

International audience. The paper studies the impact of first and third current-harmonic repartition in a five-phase Permanent Magnet machine whose Electromotive Forces (emfs) have first and third harmonics of the ...

Eliminations of Low-frequency Current Harmonics for Five-phase Open-end Winding Non-sinusoidal Machine Drives applying Neural Networks | Vu, Duc Tan

Eliminations of Low-frequency Current Harmonics for Five-phase Open-end Win...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2020-10-18

International audience. This study aims at eliminating unwanted harmonics in current control of a five-phase non-sinusoidal permanent magnet synchronous machine (PMSM) in an open-end winding configuration. The machi...

Vectorial Modeling and Control of Multiphase Machines with Non-salient Poles Supplied by an Inverter | Kestelyn, Xavier

Vectorial Modeling and Control of Multiphase Machines with Non-salient Pole...

Archive ouverte: Type de document indéfini

Kestelyn, Xavier | 2012

International audience. This chapter is devoted to the modeling and control of electrical machines having at least two independent statoric currents. The star-coupled three-phase machine without a neutral terminal o...

Chargement des enrichissements...