Generating controlled localized stimulations on haptic displays by modal superimposition | Enferad, Ehsan
/5

0 avis

Generating controlled localized stimulations on haptic displays by modal superimposition

Archive ouverte : Article de revue

Enferad, Ehsan | Giraud-Audine, Christophe | Giraud, Frédéric | Amberg, Michel | Lemaire Semail, Betty

Edité par HAL CCSD ; Elsevier

International audience. In the field of tactile feedback, researchers try to generate localized stimulations on screens. Some solutions such as time reversal or phased array use vibration induced in the screen equipped with piezoelectric ceramics. We propose to use the modal basis to reproduce a specified velocity field on such devices. We explain the theory and propose a methodology to practically synthesize the voltages to achieved a controlled focusing in a given time. Experiments on a simple demonstrator are in good agreement with the theory for various velocity fields and a reduced number of modes.

Consulter en ligne

Suggestions

Du même auteur

Preliminary design of a multi-touch ultrasonic tactile stimulator | Ghenna, Sofiane

Preliminary design of a multi-touch ultrasonic tactile stimulator

Archive ouverte: Communication dans un congrès

Ghenna, Sofiane | 2015-06-22

International audience. — This paper presents a method to control ultrasonic waves on a beam, allowing to obtain a Multi-touch ultrasonic tactile stimulation in two points, to give the sensation to two fingers, from...

Vector control method applied to a traveling wave in a finite beam | Giraud, Frédéric

Vector control method applied to a traveling wave in a finite beam

Archive ouverte: Article de revue

Giraud, Frédéric | 2014-01-02

International audience. This paper presents the closed-loop control of exciters to produce a traveling wave in a finite beam. This control is based on a dynamical modeling of the system established in a rotating ref...

Evaluation of a Friction Reduction Based Haptic Surface at High Frequency | Giraud, Frédéric

Evaluation of a Friction Reduction Based Haptic Surface at High Frequency

Archive ouverte: Communication dans un congrès

Giraud, Frédéric | 2018-03-25

International audience. The influence of the vibration frequency on the friction reduction of an ultrasonic haptic surface has been reported in the literature. The models predict that increasing the frequency of th...

Du même sujet

Experimental Study and DEM Simulation of Size Effects on the Dry Density of Rockfill Material | Zhao, Xiaolong

Experimental Study and DEM Simulation of Size Effects on the Dry Density of...

Archive ouverte: Article de revue

Zhao, Xiaolong | 2022

International audience. The initial dry density has a significant effect on the mechanical behavior of rockfill material (RFM). The size effects on the minimum/maximum dry density (referred to as dry density, ρd) of...

Thermodynamics of Extra-Toughness and Hidden-Length in Polymeric Materials with Sacrificial Bonds | Do Marco, Romain Jorge

Thermodynamics of Extra-Toughness and Hidden-Length in Polymeric Materials ...

Archive ouverte: Article de revue

Do Marco, Romain Jorge | 2022

International audience. Sacrificial bonds have been observed in several biological materials and structures and can increase their toughness, i.e., their resistance to fracture. They provide a reversible mechanism f...

Development and validation of an electrical and magnetic characterization device for massive parallelepiped specimens | Toto Jamil, Meryeme

Development and validation of an electrical and magnetic characterization d...

Archive ouverte: Article de revue

Toto Jamil, Meryeme | 2019-07-24

International audience. Claw pole (CP) machine performances are strongly related to the electromagnetic properties of ferromagnetic materials. These properties are impacted by the manufacturing processes, in a heter...

The effect of punching on electrical machine | El Youssef, Mohamad

The effect of punching on electrical machine

Archive ouverte: Article de revue

El Youssef, Mohamad | 2019-07-24

International audience. This work enlightens the impact of punching on a specific stator performances. Two specimens type are withdrawn from a M330A35 punched lamination sheet. One type represents a closed magnetic ...

Improvement of the Behavior of Cement Mortar by Vinegar Treatment of the Flax Fibers Reinforcement | Chafei, Sawsen

Improvement of the Behavior of Cement Mortar by Vinegar Treatment of the Fl...

Archive ouverte: Article de revue

Chafei, Sawsen | 2021-09

International audience. The association between plant fibers and a cement matrix generates different problems, in the fresh state and in the hardened state of the material. Several studies propose to treat the plant...

Exploitation of independent stator and rotor geometrical periodicities in electrical machines using the Schur complement | Al Eit, Moustafa

Exploitation of independent stator and rotor geometrical periodicities in e...

Archive ouverte: Article de revue

Al Eit, Moustafa | 2019

International audience. In this paper we present a-priori model reduction technique that enables to take full advantage of the periodicity existing in the stator and rotor geometrical structures of electrical machin...

Chargement des enrichissements...