Étude comparative de différents correcteurs pour la commande optimale avec défauts d'une machine pentaphasée

Archive ouverte : Article de revue

Mekri, Fatiha | Charpentier, Jean-Frederic | Kestelyn, Xavier | Semail, Eric

Edité par HAL CCSD ; Lavoisier

La version éditeur de cet article est accessible à l'adresse suivante : doi:10.3166/ejee.15.377-400. International audience. The use of multiphase PM synchronous machines associated with VSI drives appears to be a very efficient solution when a high level of reliability, compactness and acoustic behaviour is required. This kind of solution is for example very useful in naval propulsion systems. The paper deals with the optimal control of a 5-phase PM machine associated with a VSI under fault conditions. This work focus on the use of such a system in normal and fault operations. The studied fault operations are open circuited phase fault conditions. Previous works have shown that, with this kind of 5-phase drive, it is possible to determine optimal currents references which maximize the torque density and reduce the torque pulsations of the machine when one or two phases are open circuited. In this fault case, classical linear controllers (as PID for example) cannot provide a correct tracking of these optimal reference currents because they have a highly dynamical behavior. Using this optimal reference current generation, we propose in this paper to compare classical PID controllers with fixed band and adaptive band hysteresis controllers. This comparison is done using Matlab/Simulink simulation in the case of a 5 phase surface mounted permanent magnet machine in normal and open-circuited fault operations. Study results show that adaptive band hysteresis control allows a good tracking of these unconventional reference currents with a fixed switching frequency for the VSI. In this case of adaptive s band hysteresis control appears to be particularly efficient.

Consulter en ligne

Suggestions

Du même auteur

Commande avec prise en compte de défauts d’ouverture de phase d’une machine pentaphasée à aimants associée à un onduleur de tension MLI | Mekri, Fatiha

Commande avec prise en compte de défauts d’ouverture de phase d’une machine...

Archive ouverte: Communication dans un congrès

Mekri, Fatiha | 2010-07

Cet article est consacré à l’étude d’une méthode de commande d’une machine synchrone à aimant permanent à cinq phasesassociée à un onduleur de tension à MLI intersective. On s’intéresse au cas de la commande en mode normal et en m...

An Efficient Control of a Series Connected Two-Synchronous Motor 5-Phase with Non Sinusoidal EMF Supplied by a Single 5-leg VSI: Experimental and Theoretical Investigations | Mekri, Fatiha

An Efficient Control of a Series Connected Two-Synchronous Motor 5-Phase wi...

Archive ouverte: Article de revue

Mekri, Fatiha | 2012-11

International audience. This paper proposes the control scheme of an original drive which is made up of two 5-phase permanent magnet synchronous machines (PMSM) connected in series. Even if the Electro-Motive Forces...

Modélisation couplée multi-physique d’une hydrolienne RIM-DRIVEN | Drouen, Laurent

Modélisation couplée multi-physique d’une hydrolienne RIM-DRIVEN

Archive ouverte: Communication dans un congrès

Drouen, Laurent | 2013

Le travail présenté concerne le développement d’une méthodologie de conception de systèmes hydroliens innovants de type RIM-DRIVEN pour la récupération de l’énergie des courants de marée. L’originalité d’un système RIM-DRIVEN rési...

Du même sujet

Maximum Torque Per Ampere Strategy for a Biharmonic Five-phase Synchronous Machine | Zahr, Hussein

Maximum Torque Per Ampere Strategy for a Biharmonic Five-phase Synchronous ...

Archive ouverte: Communication dans un congrès

Zahr, Hussein | 2016-06-22

International audience. The paper studies the impact of first and third current-harmonic repartition in a five-phase Permanent Magnet machine whose Electromotive Forces (emfs) have first and third harmonics of the ...

Inductances and back-emf harmonics influence on the Torque/Speed characteristic of five-phase SPM machine | Scuiller, Franck

Inductances and back-emf harmonics influence on the Torque/Speed characteri...

Archive ouverte: Communication dans un congrès

Scuiller, Franck | 2014-10

In this paper, the study of torque/speed characteristic for five-phase Surface-mounted Permanent Magnet (SPM) machine is carried out. With considering several hypothesis (linear magnetic modelling, only first and third harmonic te...

An Overview of Methods using Reduced-Ordered Transformation Matrices for Fault-Tolerant Control of 5-phase Machines with an Open Phase | Vu, Duc Tan

An Overview of Methods using Reduced-Ordered Transformation Matrices for Fa...

Archive ouverte: Communication dans un congrès

Vu, Duc Tan | 2019-02-13

International audience. This paper studies control strategies using modified transformation matrices when five-phase machines operate in oneopen-phase faults. The basic idea of these methods is to maintain the rotat...

Vectorial Approach Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation | Locment, Fabrice

Vectorial Approach Based Control of a Seven-Phase Axial Flux Machine Design...

Archive ouverte: Article de revue

Locment, Fabrice | 2008-10

Version éditeur disponible à l'adresse suivante : http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4519973&isnumber=4636792. International audience. This paper deals with easy-to-implement control strategies ...

Computation of Optimal Current References for Flux-weakening of Multi-Phase Synchronous Machines | Lu, Li

Computation of Optimal Current References for Flux-weakening of Multi-Phase...

Archive ouverte: Communication dans un congrès

Lu, Li | 2012-10-25

International audience. Multi-phase synchronous machines are more and more used in specific applications where high power density, low bus voltage, wide speed range and fault-tolerant capabilities are required. Due ...

Fault Tolerant 7-phase Hybrid Excitation Permanent Magnet Machine | Zhao, Benteng

Fault Tolerant 7-phase Hybrid Excitation Permanent Magnet Machine

Archive ouverte: Communication dans un congrès

Zhao, Benteng | 2018-10-28

International audience. This paper presents a novel 7-phase hybrid excitation permanent magnet (HEPM) machine with three rotors around one stator. Two rotors with PMs axially magnetized and the third rotor with PMs ...

Chargement des enrichissements...