Identification and Validation of a Non Symmetrical System Level EMC Model for Power Electronics Converter

Archive ouverte : Communication dans un congrès

Czerniewski, Blazej | Schanen, J-L. | Chazal, Herve | Zanchetta, Pericle | Fonseca de Freitas, Caio

Edité par HAL CCSD

International audience. This paper deals with system level EMC models for power electronics converter, able to investigate the conducted emissions in embedded grid, for instance. The model topology presented in this work is not symmetric and its identification does not rely on the usual Differential / Common Mode separation. The identification method is presented, and the model is validated in different asymmetric environments: a specific configuration with a modified LISN, and another one with minus connected to ground. Both approaches are carried out in simulation and experiment, for the simple example of a boost converter.

Consulter en ligne

Suggestions

Du même sujet

Guide Delachaux des arbres de France : 200 espèces décrites et illustrées / Owen Johnson | Johnson, Owen (1966-....). Auteur

Guide Delachaux des arbres de France : 200 espèces décrites et illustrées /...

Livre | Johnson, Owen (1966-....). Auteur | 2014

NIF-Based Frequency-Domain Modeling Method of Three-Wire Shielded Energy Cables for EMC Simulation | Marlier, Clément

NIF-Based Frequency-Domain Modeling Method of Three-Wire Shielded Energy Ca...

Archive ouverte: Article de revue

Marlier, Clément | 2015-02-01

International audience. This paper focuses on the modeling method of energy cables used in power conversion systems, in the aim of EMC simulation and overvoltage analysis. Based on the node-to-node functions method,...

Oiseaux de France et d'Europe : 800 espèces, 100 chants d'oiseaux / Rob Hume | Hume, Rob (1950-....). Auteur

Oiseaux de France et d'Europe : 800 espèces, 100 chants d'oiseaux / Rob Hum...

Livre | Hume, Rob (1950-....). Auteur | 2020 - [édition avec CD]

Modelling of capacitive effects of single layer chokes and choice of magnetic core material for EMC filter design. Modélisation des effets capacitifs des bobines simple couche et choix du matériau magnétique du noyau pour le dimensionnement des filtres CEM | Salomez, Florentin

Modelling of capacitive effects of single layer chokes and choice of magnet...

Archive ouverte: Thèse

Salomez, Florentin | 2022-11-30

This thesis is about the study of the magnetic components used in the electromagnetic interference filters of power electronics converters. It is well known that static converters are sources of conducted disturbances that must be...

PWM Strategy for the Cancellation of Common-Mode Voltage Generated by Three-Phase Back-to-Back Inverters | Videt, Arnaud

PWM Strategy for the Cancellation of Common-Mode Voltage Generated by Three...

Archive ouverte: Article de revue

Videt, Arnaud | 2017-04-01

International audience. This paper presents a pulse width modulation strategy for the cancellation of common-mode (CM) voltage generated by three-phase back-to-back two-level inverters. This method theoretically pro...

Modeling and Minimization of the Parasitic Capacitances of Single-Layer Toroidal Inductors | Salomez, Florentin

Modeling and Minimization of the Parasitic Capacitances of Single-Layer Tor...

Archive ouverte: Article de revue

Salomez, Florentin | 2022-10-01

International audience. High-frequency power converters need electromagnetic interferences filters using common and differential mode chokes with low parasitic capacitance to comply with the electromagnetic compatib...

Chargement des enrichissements...